2GB Primergy BX920 S2 (D3030) Blade Server memory upgrades
RAM 1333MHz | ECC | Unbuffered | 1,5V | 2 Rank
Product specifications
Configuration rules
More information and upgrades
100% compatible
Further questions?
About Fujitsu - Siemens
- This system is subject to special guidelines regarding the installation of additional memory upgrades. Please review your manual before placing an order, or contact our sales team. We are pleased to provide you with a compliant configuration
- The system has 3 channels, 2 channels for CPU1 and one für CPU2 with each 3 slots
- Unbuffered and registered modules must not be mixed
- Each channel supports max. 2 unbuffered or Quad-rank modules
- The systems bus frequency clocks down to 1066MHz when using 2 DIMM per channel, and to 800MHz when using 3 modules
- The system clocks to a maximum of 1066MHz when using one quad-rank module per channel, and to a maximum of 800MHz when using two modules
- Each memory channel can not support more than two unbuffered or quad-rank modules
- Low voltage 1.35V modules will run at 1.5V in Systems with Intel XEON 55xx series processors.
Target system
Primergy BX920 S2 (D3030) Blade Server
System manufacturer
Fujitsu - Siemens
Category
Server
More upgrades for this system:
- 32GB Module (1 x 32GB) 240pin DIMM DDR3 - 1600MHz, ECC, Registered, 1,5V, 4 Rank
- 32GB Module (1 x 32GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,5V, 4 Rank
- 32GB Module (1 x 32GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,35V, 4 Rank
- 16GB Module (1 x 16GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,35V, 4 Rank
- 16GB Module (1 x 16GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,5V, 2 Rank
- 16GB Module (1 x 16GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,35V, 2 Rank
- 16GB Module (1 x 16GB) 240pin DIMM DDR3 - 1066MHz, ECC, Registered, 1,5V, 4 Rank
- 8GB Module (1 x 8GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,5V, 4 Rank
- 8GB Module (1 x 8GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,5V, 2 Rank
- 8GB Module (1 x 8GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,35V, 2 Rank
- 4GB Module (1 x 4GB) 240pin DIMM DDR3 - 1333MHz, ECC, Unbuffered, 1,5V, 2 Rank
- 4GB Module (1 x 4GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,5V, 2 Rank
- 4GB Module (1 x 4GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,35V, 2 Rank
- 2GB Module (1 x 2GB) 240pin DIMM DDR3 - 1333MHz, ECC, Registered, 1,5V
-
Primergy BX920 S2 (D3030) Blade Server RAM: Certified compatibility
The 2GB Server RAM listed have been certified by us for your Primergy Blade Server system. That means we vouch for the compatibility of the memory modules. CompuRAM memory modules can act like an original component to supplement RAM already installed or to be used as a spare part.
Please also read this specific note on ‘secondary memory’ in Fujitsu-servers on our blog.
In compliance with the Fujitsu - Siemens guidelines on memory upgrades, it is possible to run RAM modules from different manufacturers alongside each other in the same servers.
Please note: The figures given in the product description for criteria such as speed and timings are the minimum specifications listed by Fujitsu - Siemens and are provided for reference purposes only. For our modules we always use the most current and fastest DRAMs. That means, that we typically provide memory modules that allow an even higher timing than neccessary for your system. In the product specifications, we explicitly indicate whether these components have integrated error correction methods such as ECC RAM (Error Correctioning Code or Error Checking and Correction). -
Retention of device guarantee and OEM quality for your Fujitsu - Siemens Primergy BX920 S2 (D3030)
If you install a CompuRAM memory module in your Primergy BX920 S2 (D3030) server, this does not affect the manufacturer’s device guarantee; most manufacturers mention this explicitly in their guarantee conditions. Your entitlement to a guarantee will therefore remain unaffected by when the slots and ports intended for hardware expansions are used appropriately.
By the way, CompuRAM memory modules are usually made the same manufacturer (OEM) as the original memory installed by the server manufacturer, e.g. Fujitsu - Siemens. The technologies that are required for the safe running of a server are also integrated features to our 240pin DIMM DDR3 upgrades.
-
OEM Part-# - S26361-F4413-L513
To facilitate the identification of the appropriate upgrades, we have additionally listed for the used of Fujitsu - Siemens designation S26361-F4413-L513 here.
-
Making the best use of installed RAM
If you have 4 GB RAM or more installed in your Primergy, you will need a 64-bit server operating system in order to take full advantage of this capacity. Here you will find an overview of maximum addressable RAM in all popular operating systems.
Trust in our experience and quality:
- 10 years warranty
- 100% compatibility with mentioned target system
- Flexible exchange and return options
Fujitsu Siemens Computers, abbreviated as FSC, is the result of the merger of Fujitsu Computers Europe and Siemens Computer Systems and was the last computer manufacturer of international importance involving German participation. Until 2009, Siemens sold its shares to Fujitsu; today, the successor company "Fujitsu Technology Solutions" promotes its products under the brand name Fujitsu. The FSC portfolio includes mobile devices and notebooks as well as desktop PCs, servers, screens, mainframe computer systems and complete IT infrastructure solutions."
Recommended accessories: